Leave Your Message
Are you familiar with the proper usage procedures for the endless flat webbing sling?
News

Are you familiar with the proper usage procedures for the endless flat webbing sling?

2026-09-17

The endless Flat Webbing Sling is a closed, joint-free endless synthetic fiber lifting tool, a special category of flat webbing slings. It is entirely woven and sewn from high-strength synthetic fibers, with no additional spliced eye structures, which enables more uniform overall stress distribution and makes it suitable for various endless choker lifting scenarios. It complies with the latest industry standard JB/T 8521.1-2025, with a regular safety factor of no less than 6:1 that can be increased to 8:1 under high-risk working conditions. Its rated load ranges from 1 to 50 tons, and the effective length can be customized from 1 to 100 meters.

🔧 3 Standard Rigging Methods

Round Sling Endless Hitch‌

1. Pass the entire round sling through the lifting point of the load to form a large loop.
2. Feed the opposite end of the sling fully through the large loop and pull it taut evenly.
3. Verify that the entire loop structure is evenly stressed, free of twists and local pinching, to ensure no slippage occurs.


‌Choke Hitch‌

1. Fold the round sling in half and hang it onto the hoist hook, then pass the folded loop through the center of the load.
2. Thread the entire length of the sling on the hook side through the small loop that has been fed through the load, and tighten it to form a self-locking structure.
3. This rigging method reduces the sling's rated load capacity by approximately 50%. Overloading is strictly prohibited.
‌

Basket Hitch‌

1. Run the entire round sling under the bottom of the load, and hang both end eyes onto the hoist hook simultaneously.
2. Adjust the position of the sling so that the two sling bodies share the load evenly to prevent offset.
3. Keep the included angle between the two sling legs no more than 90°. If the angle exceeds 120°, the actual tension will rise sharply, leading to a high risk of overload-induced breakage.

📌 Critical Safety Precautions

1. Inspect the sling before every use. Stop using it immediately if there are cuts, abrasions, fiber degradation, or loose stitching.
2. When the load has sharp corners, dedicated edge protectors must be installed at all contact points to prevent the sharp edges from slicing through the sling fibers.
3. Never use the sling in a twisted or knotted state, nor hang it directly on the sharp edges of the hook, to avoid fracture caused by localized stress concentration.