Industrial packaging-Good Ratchet Straps-2
一. Features of the Ratchet Straps
1. Structural features
It is composed of the tensioner body and the tensioning handle.
The middle part of the main body of the tensioner is provided with a fixed groove for the packing strap, which is composed of four sector-shaped blocks of the same size. A tensioning gear is provided in the middle inner cavity. The fixing groove of the packing strap is coaxial with the tensioning gear and is movably connected to the main body of the tensioner through a bearing. A pair of symmetrical handle fixing plates are provided on both sides of the tensioning gear.
The bottom of the tensioning handle meshes with the tensioning gear. On the right side of the middle part of the tensioner body where the packing strap is fixed, there is also a support. The support is fixedly connected to the tensioner body. At the outer edge of the support, there is a pressing groove for pressing the packing strap. The two are movably connected. One side of the pressure band groove is provided with a pressure band groove handle for lifting the pressure band groove, and the pressure band groove handle is fixedly connected to the pressure band groove.
At the bottom of the middle position of the tensioner body and at the bottom of the right end, there is each an anti-slip support plate. Any anti-slip support plate is fixedly connected to the tensioner body.
2. The effect of the Ratchet Straps
Through structural design, the structure of the tensioner has become simpler and more reasonable, its operation more convenient, and it is easier to carry. And through the unique design of the strapping band slot, it effectively prevents the strapping band from coming apart during the tensioning process. After the installation of this device, the packaging efficiency has been effectively enhanced, mobile office work has been realized, the workload of employees has been greatly reduced, and the packaging effect has also been significantly improved.
二. The implementation method of the rope tensioner
1. Installation instructions
First, move the pressure band groove away by controlling the handle of the pressure band groove. Place the packing strap on the strap support and close the pressure band groove by controlling the handle of the pressure band groove. This design can effectively prevent the packing strap from overflowing. Wrap the packing strap of the packed items around the fixed groove of the packing strap. Control the tensioning handle. Through the meshing of the tensioning handle and the tensioning gear, the fixed groove of the packing strap will rotate synchronously. Tighten the packing straps simultaneously until they achieve a taut effect, and the entire packing process is completed.
2. Disassembly instructions
Hold the two safety plates with both hands respectively and pull them to both sides until the tensioner is level, then pull out the webbing.
三. Application of the Tensioner for Ratchet Straps
1. Packaging of large equipment
2. Fixed consignment of goods
3. Packaging of gas purification equipment
4. Wooden box fixation



